Fast Transmission Photothermal Radiometry via Sampling by an Internal Computer Sound Card

During the last few decades, photothermal radiometry (PTR) has been greatly developed and widely applied in the field of nondestructive testing. However, the traditional PTR system employs an expensive lock-in amplifier to detect the weak photothermal signal, which leads to high cost and long test time. In this paper, a fast transmission PTR system based on sampling by using an internal computer sound card was developed to lower the system cost and shorter the test time. A piece of amorphous silicon (a:Si) thin film solar cells with artificial defects was prepared and tested by the system. The results show that the sharpened defects can be identified easily and quickly according to the significant peaks of the original infrared signal sampled by the internal computer sound card. Furthermore, more detailed defects can be investigated by processing the infrared signal. These validate the effectiveness of the proposed transmission PTR system as a low cost and efficient non-destructive test technique.     

“聚龙一号”装置四层圆盘锥磁绝缘传输线的三维粒子模拟研究

介绍了"聚龙一号"中四层圆盘锥磁绝缘传输线(MITL)的基本理论。在CPIPIC平台上,采用非均匀网格和周期性对称边界条件,建立了"聚龙一号"的四层圆盘锥MITL的三维粒子模拟模型。设置相应的参数并用并行算法模拟得到了该器件中各层在绝缘堆上和MITL中间位置的电流和汇流后的电流,并与理论和实验数据进行相互对比验证。模拟结果表明整个器件在达到磁绝缘状态后具有很高的传输效率,并与实验结果相互验证,为以后进一步的研究提供了保证。     

TR180旋挖钻机动力头结构设计

动力头是旋挖钻机的关键部件,其性能好坏直接影响钻机整机性能的。文中介绍了TR 180旋挖钻机动力头的结构设计,着重分析了齿轮箱传动系统、滑动支架总成和缓冲装置。     

Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

An equiatomic CoCrFeNiMn high-entropy alloy was synthesized by mechanical alloying (MA) and spark plasma sintering (SPS). During MA, a solid solution with refined microstructure of 10 nm which consists of a FCC phase and a BCC phase was formed. After SPS consolidation, only one FCC phase can be detected in the HEA bulks. The as-sintered bulks exhibit high compressive strength of 1987 MPa. An interesting magnetic transition associated with the structure coarsening and phase transformation was observed during SPS process.     

A novel fast distance relay for series compensated transmission lines

This paper presents a fast distance relay for series compensated transmission lines based on the R–L differential-equation algorithm using the theory of equal transfer process of transmission lines. The measuring distances based on the proposed algorithm can fast approach the actual value of fault distance when a fault occurs in front of the series capacitor. When a fault occurs behind of the series capacitor, the fault loop, including the series capacitor, does not match the R–L transmission line model, so the measuring distances fluctuate severely. Based on this, the relative position of the fault with respect to the series capacitor can be judged effectively according to the fluctuation range of the measuring distances, and the accurate fault location can be obtained fast. A variety of PSCAD/EMTDC simulation tests show that the new relay has fast operating speed and high accuracy when applied to the long series compensated transmission lines.     

Availability growth models and verification of power equipment

The general availability growth models for large scale complicated repairable system such as electric generating units, power station auxiliaries, and transmission and distribution installations are presented. The calculation formulas for the maintenance coefficient, mathematical expressions for general availability growth models, ways for estimating, and fitting on checking the parameters of the model are introduced. Availability growth models for electric generating units, power station auxiliaries, and transmission and distribution installations are given together with verification examples for availability growth models of 320–1000 MW nuclear power units and 1000 MW thermal power units, 200–1000 MW power station auxiliaries, and 220–500 kV transmission and distribution installations. The verification results for operation availability data show that the maintenance coefficients for electric generating units, power station auxiliaries, transmission and distribution installations conform to the power function, and general availability growth models conform to rules of availability growth tendency of power equipment.     

Evaluating the commercial airliner cabin environment with different air distribution systems

Ventilation systems for commercial airliner cabins are important in reducing contaminant transport and maintaining thermal comfort. To evaluate the performance of a personalized displacement ventilation system, a conventional displacement ventilation system, and a mixing ventilation system, this study first used the Wells‐Riley equation integrated with CFD to obtain the SARS quanta value based on a specific SARS outbreak on a flight. This investigation then compared the three ventilation systems in a seven‐row section of a fully occupied, economy‐class cabin in Boeing 737 and Boeing 767 airplanes. The SARS quanta generation rate obtained for the index patient could be used in future studies. For all the assumed source locations, the passengers’ infection risk by air in the two planes was the highest with the mixing ventilation system, while the conventional displacement ventilation system produced the lowest risk. The personalized ventilation system performed the best in maintaining cabin thermal comfort and can also reduce the infection risk. This system is recommended for airplane cabins.     

Temporal information based GoP adaptation for linear video delivery schemes

An original wireless video transmission scheme called SoftCast has been recently proposed to deal with the issues encountered in conventional wireless video broadcasting systems (e.g. cliff effect). In this paper, we evaluate and optimize the performance of the SoftCast scheme according to the transmitted video content. Precisely, an adaptive coding mechanism based on GoP-size adaptation, which takes into account the temporal information fluctuations of the video, is proposed. This extension denoted Adaptive GoP-size mechanism based on Content and Cut detection for SoftCast (AGCC-SoftCast) significantly improves the performance of the SoftCast scheme. It consists in modifying the GoP-size according to the shot changes and the spatio-temporal characteristics of the transmitted video. When hardware capacities, such as buffer or processor performance are limited, an alternative method based only on the shot changes detection (AGCut-SoftCast) is also proposed. Improvements up to 16 dB for the PSNR and up to 0.55 for the SSIM are observed with the proposed solutions at the cut boundaries. In addition, temporal visual quality fluctuations are reduced under 1dB in average, showing the effectiveness of the proposed methods.     

Efficient Photomodulation of Visible Eu(III) and Invisible Yb(III) Luminescences using DTE Photochromic Ligands for Optical Encryption

This work describes a class of complex combining three dithienylethene units and a lanthanide ion used as an optical system displaying a double encryption method: i) a colorful code, drawn and erased under UV and visible irradiations respectively, due to coloration and discoloration of the photochromic entities, and ii) a concomitant gradual disappearance and progressive restoration of the associated lanthanide ion luminescence triggered with the same stimuli. The innovation of the system stems from the emission color tunability, i.e., with either a lanthanide ion emitting only in the visible range (Eu³⁺) or with another lanthanide ion emitting only in the near infrared (NIR) range (Yb³⁺), therefore observable, or not, to the naked eye. This system is the very first one to achieve efficient repeatable modulation of pure NIR luminescence on photochemical command. Furthermore, it is proven to be highly efficient when embedded in a PDMS polymer opening real opportunities for practical applications as anti‐counterfeiting.